TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 374 of 1144
TM 9-2320-361-24-2 0295 00 0295 00-2 TANK BODIES FRONT SPLASH GUARD REPLACEMENT (Contd) WARNING Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. NOTE Left and right front splash guards are replaced the same way. REMOVAL 1. Remove two locknuts (8) and screws (9) from braces (7) and splash guard (10). Discard locknuts (8). 2. Remove two locknuts (6), screws (5), and braces (7) from frame (4). Discard locknuts (6). NOTE Perform step 3 on left side of vehicle if vehicle is equipped with pioneer tool kit. 3. Remove two locknuts (13) and screws (1) from pioneer tool bracket (12) and splash guard (10). Discard locknuts (13). 4. Remove three locknuts (11), screws (3), and splash guard (10) from frame (2). Discard locknuts (11). INSTALLATION 1. Install splash guard (10) on frame (2) with three screws (3) and new locknuts (11). NOTE Perform step 2 on left side of vehicle if vehicle is equipped with pioneer tool kit. 2. Install pioneer tool bracket (12) on splash guard (10) with two screws (1) and new locknuts (13). 3. Install two braces (7) on frame (4) with two screws (5) and new locknuts (6). 4. Install two braces (7) on splash guard (10) with two screws (9) and new locknuts (8). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10).