TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 347 of 1144
TM 9-2320-361-24-2 0286 00 0286 00-3/4 blank FILTER SEPARATOR MAINTENANCE (M49A2C) (Contd) ASSEMBLY 1. Install three new filter elements (15), three new filter elements (22), and canisters (14) on filter separator (11). 2. Install three screws (10), washers (9), and nuts (7) on filter separator brackets (8). 3. Install plate (6) on filter separator (11) with three washers (5) and six nuts (4). 4. Install valve (26) on cover (3) with new cotter pin (27). 5. Install new gasket (23) and cover (3) on filter separator (11) with coupling clamp (25) and nut (24). INSTALLATION NOTE Male pipe threads must be wrapped with antiseize tape before installation. 1. Install new gasket (16) on separator pipe (20). 2. Install filter separator (11) on shelf (13) and separator pipe (20) with four screws (12) and new locknuts (17). 3. Install coupling (18) on gasket (16), filter separator (11), and separator pipe (20) with two screws (21) and nuts (19). 4. Connect air eliminator hose (1) and nipple (2) to cover (3). 5. Install filter separator element test valve, gauge, and lines (WP 0285 00). 6. Install meter-to-filter tube (WP 0275 00). 7. Connect battery ground cable (WP 0126 00). 8. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 7 8 9 10 11 12 4 5 6 14 13 15 16 17 18 19 20 21 18 22 3 2 1 27 26 25 24 23