TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 336 of 1144
TM 9-2320-361-24-2 0282 00 0282 00-2 METER OUTLET TUBE REPLACEMENT (M49A2C) (Contd) WARNING • Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. • Accidental or intentional introduction of liquid contaminants into the environment is a violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to do so may result in damage to environment and health of personnel. NOTE Use a drain pan to capture any draining fuel. Dispose of fluids in accordance with local policy and ordinances. Ensure all spills are cleaned up. REMOVAL 1. Remove two locknuts (6), screws (8), and gasket (7) from outlet tube (13) and meter (5). Discard locknuts (6) and gasket (7). 2. Remove two nuts (15), screws (2), coupling (3), and gasket (14), from meter outlet tube (13) and fuel hose tube (1). Discard gasket (14). 3. Remove four locknuts (9), screws (12), plate (11), and grommet (10) from tank body (4). Discard locknuts (9). 4. Remove meter outlet tube (13) from tank body (4). INSTALLATION 1. Install grommet (10) and plate (11) on tank body (4) with four screws (12) and new locknuts (9). 2. Install meter outlet tube (13) through hole in tank body (4). 3. Install new gasket (14) and coupling (3) on meter outlet tube (13) and fuel hose tube (1) with two screws (2) and nuts (15). 4. Install meter outlet tube (13) and new gasket (7) on meter (5) with two screws (8) and new locknuts (6). 5. Install fuel hose and nozzle (WP 0269 00). 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE ~ 1 2 4 3 15 3 14 13 12 11 10 9 8 13 7 6 5