TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 326 of 1144
TM 9-2320-361-24-2 0277 00 0277 00-2 DELIVERY PUMP OUTLET TUBE REPLACEMENT (M49A2C) (Contd) WARNING • Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. • Accidental or intentional introduction of liquid contaminants into the environment is a violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to do so may result in damage to environment and health of personnel. NOTE Use a drain pan to capture any draining fuel. Dispose of fluids in accordance with local policy and ordinances. Ensure all spills are cleaned up. REMOVAL 1. Remove four screws (7), lockwashers (8), and gasket (9) from outlet tube (5) and delivery pump (1). Discard lockwashers (8) and gasket (9). Remove gasket remains from mating surfaces. 2. Remove four screws (6), locknuts (2), gasket (4), and outlet tube (5) from gate valve (3). Discard locknuts (2) and gasket (4). Remove gasket remains from mating surfaces. INSTALLATION 1. Install new gasket (9) and outlet tube (5) on delivery pump (1) with four screws (7) and new lockwashers (8). 2. Install new gasket (4) and outlet tube (5) on gate valve (3) with four screws (6) and new locknuts (2). 3. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 2 3 4 5 6 7 8 9 1