TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 318 of 1144
TM 9-2320-361-24-2 0273 00 0273 00-2 FILTER SEPARATOR-TO-SUMP PIPE REPLACEMENT (M49A2C) (Contd) WARNING • Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. • Accidental or intentional introduction of liquid contaminants into the environment is a violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to do so may result in damage to environment and health of personnel. NOTE Use a drain pan to capture any draining fuel. Dispose of fluids in accordance with local policy and ordinances. Ensure all spills are cleaned up. REMOVAL Remove four screws (2), nuts (5), two couplings (3), filter separator-to-pump pipe (1), and two gaskets (6) from sump valve housing (4) and filter separator (7). Discard gaskets (6). INSTALLATION 1. Install two new gaskets (6) and filter separator-to-sump pipe (1) on sump valve housing (4) and filter separator (7) with two couplings (3), four screws (2), and nuts (5). 2. Connect battery ground cable (WP 0126 00). 3. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 2 3 4 6 3 5 2 7 3