TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 235 of 1144
TM 9-2320-361-24-2 0252 00 0252 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) REFLECTOR REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Six locknuts (item 165, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL 1. Remove two locknuts (1), screws (4), and yellow reflector (3) from forward cargo body side (2). Discard locknuts (1). 2. Remove two locknuts (8), screws (5), and red reflector (6) from rear cargo body side (7). Discard locknuts (8). 3. Remove two locknuts (12), screws (11), and red reflector (10) from rear cargo body (9). Discard locknuts (12). INSTALLATION 1. Install red reflector (10) on rear cargo body (9) with two screws (11) and new locknuts (12). 2. Install red reflector (6) on rear cargo body side (7) with two screws (5) and new locknuts (8). 3. Install yellow reflector (3) on forward cargo body side (2) with two screws (4) and new locknuts (1). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). ~ ~ ~ END OF WORK PACKAGE 2 3 4 1 8 7 6 5 12 11 10 9