TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 206 of 1144
TM 9-2320-361-24-2 0242 00 0242 00-2 WINDSHIELD WIPER IDLER SHAFT AND HOUSING REPLACEMENT (Contd) NOTE The replacement procedure for the left and right idler shaft and housing assembly is basically the same. This procedure covers the left idler shaft and housing assembly. REMOVAL Remove two screws (4), locknuts (1), and idler shaft and housing assembly (2) from windshield frame (5). Discard locknuts (1). INSTALLATION 1. Apply grease to surface of shaft (3). 2. Install idler shaft and housing assembly (2) on windshield frame (5) with two screws (4) and new locknuts (1). 3. Install left and right conlinks (WP 0240 00). 4. Install wiper blade and arm (WP 0243 00). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 5 4 2 3 END OF WORK PACKAGE