Sign up to sell your inventory with NSN Lookup
TM-9-2320-361-24-2 Page 194

TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks

Page 194 of 1144


Download
TM 9-2320-361-24-2 0239 00 0239 00-2 WINDSHIELD WASHER RESERVOIR, TUBING, JET, AND PUMP REPLACEMENT (Contd) WINDSHIELD WASHER RESERVOIR REMOVAL 1. Remove cover (17) with grommet (16) from reservoir (19). Remove strainer (18) from hose (7) and hose (7) from grommet (16) and cover (17). 2. Remove three locknuts (24), two clamps (23), plate (22), two screws (21), washers (20), and reservoir (19) from steering column (25). Discard locknuts (24). WINDSHIELD WASHER TUBING REMOVAL NOTE Tag hose and tubes for installation. 1. Disconnect tubes (4), (6), and (28) from valve (29). 2. Disconnect hose (7) and tubes (6) and (9) from tee connector (8). 3. Remove grommet (27) and hose (7) from dash panel (26). WINDSHIELD WASHER JET REMOVAL Remove nut (5), washer (2), and jet (3) from cowling (1). WINDSHIELD WASHER PUMP REMOVAL Remove locknut (10), washer (11), windshield washer pump (13), washer (14), and screw (15) from instrument panel (12). Discard locknut (10). WINDSHIELD WASHER PUMP INSTALLATION Install windshield washer pump (13) on instrument panel (12) with washer (14), screw (15), washer (11), and new locknut (10). WINDSHIELD WASHER JET INSTALLATION Install washer (2) and jet (3) on cowling (1) with nut (5). WINDSHIELD WASHER TUBING INSTALLATION 1. Install grommet (27) and hose (7) on dash panel (26). 2. Install tubing (28) on jet (3) and install tubing (4) and (9) on pump (13). 3. Install hose (7) and tubing (9) and (6) on tee connector (8). 4. Install tubing (4), (6), and (28) on valve (29). WINDSHIELD WASHER RESERVOIR INSTALLATION 1. Install two clamps (23) on steering column (25). 2. Install plate (22) and reservoir (19) on clamps (23) with three screws (21), washers (20), and new locknuts (24). 3. Install grommet (16) in cover (17). 4. Install tube (7) through grommet (16) and connect to strainer (18). Position strainer (18) at bottom of reservoir (19) and install cover (17) on reservoir (19). 5. Connect battery ground cable (WP 0126 00). 6. Lower and secure hood (TM 9-2320-361-10). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10).