TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 190 of 1144
TM 9-2320-361-24-2 0238 00 0238 00-4 FRONT FENDERS MAINTENANCE (Contd) INSTALLATION NOTE Assistant will help with step 1. 1. Install fender mount spacer (24), new anti-squeak material (1), and fender (13) on cowl (4) and fender support (21) with three new screw-assembled lockwashers (16), springs (27), nine washers (23), screws (26), and new locknuts (22). Do not tighten locknuts (22) or screw-assembled lockwashers (16). 2. Install brace (18) on frame (5) and fender (13) with new screw-assembled lockwasher (19), screw (17), and new locknut (14). Do not tighten screw-assembled lockwasher (19) or locknut (14). 3. Install two screws (15), washers (2), and new locknuts (3) on brace (20) and fender (13). Do not tighten locknuts (3). 4. Install fender (13) to light support bracket (10) with two screws (7), washers (6), and new locknuts (12). Do not tighten locknuts (12). 5. Install fender (13) to light support bracket (10) with three washers (9), screws (8), washers (9), and new locknuts (11). Do not tighten locknuts (11). NOTE Assistant will help with step 6. 6. Align fender (13) with cowl (4), brace (20), support (21), and light support bracket (10). Tighten screw-assembled lockwashers (16) and (19) and locknuts (22), (3), (11), (12), and (14). 7. Install wiring harness (25) on fender support (21) with two clamps (29), screws (30), and new locknuts (28). 8. Install exhaust system (right side only) (WP 0073 00 or WP 0074 00). 9. Install air horn (right side only) (WP 0114 00). 10. Install front composite light housing and brackets (WP 0122 00). 11. Install side panel (WP 0218 00). 12. Install front wheels (TM 9-2320-361-10). 13. Connect battery ground cable (WP 0126 00). 14. Lower and secure hood (TM 9-2320-361-10). 15. Release parking brake and remove wheel chocks (TM 9-2320-361-10).