TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 184 of 1144
TM 9-2320-361-24-2 0237 00 0237 00-2 DRIVER’S SEAT CUSHION, BACKREST, FRAME, AND SEAT ADJUSTER REPLACEMENT (Contd) DRIVER’S SEAT CUSHION REMOVAL Remove four screws (14), lockwashers (15), two seat cushion brackets (16), and washers (13) from seat cushion (17) and seat frame (3). Remove seat cushion (17) from seat frame (3). Discard lockwashers (15). DRIVER’S SEAT BACKREST REMOVAL 1. Remove two screws (6), lockwashers (5), and clips (4) from seat backrest (1) and seat frame (3). Discard lockwashers (5). 2. Remove four screws (7), backrest (1), and plate (2) from seat frame (3). DRIVER’S SEAT FRAME REMOVAL Remove four locknuts (8) and seat frame (3) from seat adjusters (11). Discard locknuts (8). DRIVER’S SEAT ADJUSTER REMOVAL Remove four locknuts (10), two seat adjusters (11), and release wire (12) from seat base (9). Discard locknuts (10). DRIVER’S SEAT ADJUSTER INSTALLATION Install two seat adjusters (11) and wire (12) on seat base (9) with four new locknuts (10). DRIVER’S SEAT FRAME INSTALLATION Install seat frame (3) on seat adjusters (11) with four new locknuts (8). DRIVER’S SEAT BACKREST INSTALLATION 1. Install plate (2) and backrest (1) on seat frame (3) with four screws (7). 2. Install two clips (4) on seat frame (3) and backrest (1) with two new lockwashers (5) and screws (6). DRIVER’S SEAT CUSHION INSTALLATION 1. Position two washers (13), seat cushion brackets (16), and seat cushion (17) on frame (3). 2. Install two seat cushion brackets (16), two washers (13), and seat cushion (17) on seat frame (3) with four screws (14) and new lockwashers (15). 3. Connect battery ground cable (WP 0126 00). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10).