TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 150 of 1144
TM 9-2320-361-24-2 0228 00 0228 00-2 WINDSHIELD ASSEMBLY MAINTENANCE (Contd) WARNING Windshield is heavy. An assistant is required during removal and installation to prevent injury to personnel. REMOVAL NOTE Perform steps 1 through 3 for vehicles equipped with hardtop kit. 1. Remove two screws (12) and lockwashers (11) from cab hardtop (13) and windshield frame (5). Discard lockwashers (11). 2. Remove two screws (2), spacers (3), and locknuts (4) from cab hardtop (13) and windshield frame (5). Discard locknuts (4). 3. Loosen two knobs (22). NOTE • Two lower hinges are attached to cab by six screw-assembled lockwashers. Exhaust support is attached to lower right hinge and cab by a longer screw and lockwasher. • Assistant will help with step 4. 4. Remove six screw-assembled lockwashers (28) and windshield frame (5) from left (29) and right (31) upper hinges and cab (32). Discard screw-assembled lockwashers (28). 5 Remove six screw-assembled lockwashers (26) and lower left hinge (25) from cab (32). Discard screw assembled lockwashers (26). 6. Remove six screw-assembled lockwashers (35) from lower right hinge (30) and cab (32). Discard screw-assembled lockwashers (35). 7. Remove screw (34), lockwasher (33), and lower right hinge (30) from exhaust support (36) and cab (32). Discard lockwasher (33). 8. Remove four screws (17) and two brackets (18) from windshield frame (5). 9. Remove four screws (21), two plates (19), and weatherstrips (20) from two brackets (18). Discard weatherstrips (20). 10. Remove weatherstrip (1) from windshield frame (5). Discard weatherstrip (1). Clean windshield frame (5) of all weatherstrip (1) remains. 11. Remove snap fastener stud (7) and retainer nut (6) from windshield frame (5). 12. Remove seal (10), four screws (9) and retainer (8) from windshield frame (5). 13. Remove seal (14), two screws (15) and retainer (16) from windshield frame (5). DISASSEMBLY 1. Remove two knobs (22) and studs (23) from upper hinges (29). 2. Remove two nuts (27), hinge bolts (24), and upper hinges (29) from lower hinges (25).