TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 140 of 1144
TM 9-2320-361-24-2 0224 00 0224 00-2 CAB COWL VENT REPLACEMENT (Contd) REMOVAL 1. Remove nine screws (4) and cowl vent screen (5) from kick panel (1). 2. Remove cotter pin (8), hinge pin (3), and cab cowl vent door (6) from bracket (2). Discard cotter pin (8). 3. Inspect cab cowl vent door seal (7). If damaged, clean cab cowling seal mounting surface (9) free of seal (7) debris and replace seal (7). INSTALLATION NOTE Perform steps 1 and 2 only if seal was removed. 1. Apply adhesive to mounting side of seal (7) and cowling seal mounting surface (9). 2. Install seal (7) on cab cowling seal mounting surface (9). 3. Install cab cowl vent door (6) and hinge pin (3) on bracket (2) with new cotter pin (8). 4. Install cab cowl vent screen (5) on kick panel (1) with nine screws (4). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 2 4 5 3 6 7 9 8