TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 104 of 1144
TM 9-2320-361-24-2 0213 00 0213 00-2 CAB DOOR WINDOW REGULATOR AND HANDLE REPLACEMENT (Contd) WINDOW REGULATOR HANDLE REMOVAL Remove screw (6), window regulator handle (5), and washer (4) from cab door window regulator (7). CAB DOOR WINDOW REGULATOR REMOVAL NOTE Cab door window regulator must be supported as last screw is removed. 1. Remove four screws (3) from inner door panel (2) and cab door window regulator (7). 2. Slide regulator arm stud (8) out of stationary track (9) and remove cab door window regulator (7) through cab door (1) inspection hole. CAB DOOR WINDOW REGULATOR INSTALLATION 1. Install window regulator (7) through cab door (1) inspection hole and slide regulator arm stud (8) into stationary track (9). NOTE Regulator arm stud must be held in stationary track when installing window regulator to inner door panel. 2. Install window regulator (7) on inner door panel (2) with four screws (3). WINDOW REGULATOR HANDLE INSTALLATION 1. Install washer (4) and window regulator handle (5) on window regulator (7) with screw (6). 2. Install cab door glass (WP 0210 00). 3. Connect battery ground cable (WP 0126 00). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10).