TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 1023 of 1144
INSTALLATION (Contd) 6. Install six screws (7) and new locknuts (8) on six mounting brackets (6). 7. Remove lifting device, chains, and guide lines from van body (2). NOTE Perform step 8 if van body is equipped with heater. 8. Connect fuel line (26) to elbow (19) by tightening nut (27). 9. Install bond assembly (21) on van body (2) with screw (22). 10. Install clamp (24) on van body (2) with screw (23). 11. Connect lead (25) to circuit breaker (20). 12. Install ladders (WP 0325 00). 13. Install front and rear splash guards (WP 0329 00 and WP 0299 00). 14. Connect battery ground cable (WP 0126 00). 15. Release parking brake and remove wheel chocks (TM 9-2320-361-10). TM 9-2320-361-24-2 0462 00 0462 00-5/6 blank VAN BODY MAINTENANCE (Contd) 1 4 2 3 LIFTING DEVICE UTILITY CHAINS M109A3 AND M185A3 M109A3 M185A3 7 6 8 12 10 11 5 13 10 9 15 17 18 16 14 5 6 6 5 ~ 2 20 21 22 24 23 25 26 27 19 END OF WORK PACKAGE