TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 1020 of 1144
TM 9-2320-361-24-2 0462 00 0462 00-2 VAN BODY MAINTENANCE (Contd) REMOVAL 1. Disconnect lead (7) from circuit breaker (2). 2. Remove screw (5) from clamp (6). 3. Remove screw (4) from bond assembly (3). NOTE • Perform step 4 if van body is equipped with heater. • Have drainage container ready to catch fuel. 4. Loosen nut (9) and disconnect fuel line (8) from elbow (1). Allow excess fuel to drain into container. 5. Remove six locknuts (18) and screws (17) from six mounting brackets (16). Discard locknuts (18). NOTE Step 6 applies to M109A3 vehicles only. 6. Remove four locknuts (10), screws (15), washers (14), and springs (13) and (12) from two mounting brackets (11). Discard locknuts (10). NOTE Step 7 applies to M185A3 vehicles only. 7. Remove four locknuts (19), screws (21), eight spring keepers (20), four springs (22), and springs (23) from two mounting brackets (11). Discard locknuts (19).