TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 986 of 1176
TM 9-2320-361-24-1 0155 00 0155 00-2 FRONT SPRING BUMPER REPLACEMENT (Contd) REMOVAL NOTE Left and right spring bumpers and seats are replaced the same way. This procedure covers the right side. 1. Remove four nuts (7), lockwashers (6), two U-bolts (1), bumper (3), and saddle (2) from spring (4) and plate (5). Discard lockwashers (6). 2. Remove saddle (2) from bumper (3). INSTALLATION 1. Apply sealant around top mating surface of metal base of bumper (3) and saddle (2). 2. Install bumper (3) in saddle (2) and set saddle (2) over center bolt (8) on spring (4). 3. Install two U-bolts (1) over saddle (2) and plate (5) with four new lockwashers (6) and nuts (7). Tighten nuts (7) 190–230 lb-ft (258–312 N•m). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 4 3 1 2 1 8 5 6 7