TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 936 of 1176
TM 9-2320-361-24-1 0144 00 0144 00-2 FRONT AND REAR AXLE BREATHER MAINTENANCE (Contd) REMOVAL NOTE This procedure is for all axles. Remove breather (1) from axle housing (2). CLEANING WARNING Skysol 100 solvent is combustible; DO NOT use or store near heat, sparks, flame, or other ignition sources. Use mechanical ventilation whenever product is used in a confined space, heated above ambient temperatures, or agitated. Keep container sealed when not in use. Contact with Skysol 100 may cause skin irritation. Use chemical-resistant gloves. In case of skin contact, remove any contaminated clothing and wash skin thoroughly with soap and water. Wash contaminated clothing before reuse. Eye contact may cause irritation, tearing, or blurring of vision. Use face shield or goggles when eye contact may occur. In case of eye contact, flush eyes with large amounts of water for at least 15 minutes or until irritation subsides. Inhalation may cause irritation to upper respiratory passages. DO NOT have food or drink in the vicinity. Failure to comply may result in injury to personnel. Clean breather (1) in Skysol 100 and dry with clean rag. INSTALLATION 1. Install breather (1) in axle housing (2). 2. Connect battery ground cable (WP 0126 00). 3. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 2 END OF WORK PACKAGE