TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 933 of 1176
TM 9-2320-361-24-1 0143 00 0143 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) FRONT AXLE OIL SEAL ASSEMBLY REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Tools and Special Tools Puller, mechanical (item 61, WP 0469 00) Oil seal inserter (item 81, WP 0469 00) Materials/Parts Oil seal assembly (item 416, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). Front axle shaft removed (WP 0142 00). REMOVAL Using mechanical puller, remove oil seal assembly (1) from axle housing (2). Discard oil seal assembly (1). INSTALLATION 1. Using oil seal inserter, install new oil seal assembly (1) in axle housing (2). 2. Install front axle shaft (WP 0142 00). 3. Connect battery ground cable (WP 0126 00). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 2 1 MECHANICAL PULLER 2 1 OIL SEAL INSERTER