TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 922 of 1176
TM 9-2320-361-24-1 0141 00 0141 00-4 UNIVERSAL JOINT MAINTENANCE (Contd) CLEANING AND INSPECTION WARNING Skysol 100 solvent is combustible; DO NOT use or store near heat, sparks, flame, or other ignition sources. Use mechanical ventilation whenever product is used in a confined space, heated above ambient temperatures, or agitated. Keep container sealed when not in use. Contact with Skysol 100 may cause skin irritation. Use chemical-resistant gloves. In case of skin contact, remove any contaminated clothing and wash skin thoroughly with soap and water. Wash contaminated clothing before reuse. Eye contact may cause irritation, tearing, or blurring of vision. Use face shield or goggles when eye contact may occur. In case of eye contact, flush eyes with large amounts of water for at least 15 minutes or until irritation subsides. Inhalation may cause irritation to upper respiratory passages. DO NOT have food or drink in the vicinity. Failure to comply may result in injury to personnel. 1. Clean all parts with Skysol 100 and dry with clean rag. 2. Inspect yokes (2) for breaks, cracks, and bends. Replace yokes (2) if damaged. 3. Inspect retaining ring grooves (1) for damage. Replace yoke flange (7) or yoke (2) if retaining ring grooves (1) are damaged. 4. Inspect shaft (3) for bends, cracks, and damaged threads (5) or splines (4). Replace shaft (3) if damaged, bent or cracked. 5. Inspect bearings (6) in bearing cap (2) (TM 9-214). Replace U-joint if damaged. 1 1 2 1 6 3 4 5 7