TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 920 of 1176
TM 9-2320-361-24-1 0141 00 0141 00-2 UNIVERSAL JOINT MAINTENANCE (Contd) NOTE • Do not remove bearings from caps, except when replacing caps. • Mark mating yoke position for installation. REMOVAL 1. C-ring and retaining ring type: a. Remove four retaining rings (1) from yoke (5) and yoke flange (3). Discard retaining rings (1). b. Remove four bearing caps (2), yoke flange (3), and universal joint (4) from yoke (5). c. Remove four seals (6) and lubrication fitting (7) from universal joint (4). Discard seals (6). 2. Cap type: a. Remove eight screws (8), four straps (9), and bearing caps (10) from yoke (5) and yoke flange (3). b. Remove yoke flange (3) and universal joint (4) from yoke (5). c. Remove four seals (6) and lubrication fitting (7) from universal joint (4). Discard seals (6).