TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 917 of 1176
TM 9-2320-361-24-1 0140 00 0140 00-5/6 blank INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) (Contd) INSTALLATION 1. Install frame support (4) to crossmember (6) with four screws (5) and new locknuts (3). 2. Install flange yoke (25) on studs (1) of transfer flange (27) in parking brake drum (2) with four new locknuts (26). Ensure scribed marks align. Tighten locknuts (26) 90–120 lb-ft (122–163 N•m). 3. Install bearing housing (17) to frame support (4) with two screws (7), washers (15), and new locknuts (16). 4. Install deflector (12) and flange (11) on shaft (23) with washer (10) and nut (9). 5. Tighten nut (9) on shaft (23) 260–290 lb-ft (353–393 N•m). 6. Install new cotter pin (8) through nut (9). 7. Ensure shaft (23) turns freely and with no side play at U-joint (24) and support bearing (19). 8. Install forward-rear propeller shaft (WP 0139 00). 9. Lubricate bearing housing (WP 0020 00). 10. Connect battery ground cable (WP 0126 00). 11. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 6 5 7 4 3 8 9 10 11 14 14 15 16 19 18 20 21 22 23 26 25 2 1 27 13 13 12 17 24 28