Sign up to sell your inventory with NSN Lookup
TM-9-2320-361-24-1 Page 914

TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks

Page 914 of 1176


Download
TM 9-2320-361-24-1 0140 00 0140 00-2 INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) (Contd) REMOVAL 1. Remove cotter pin (8), nut (9), washer (10), flange (11), and deflector (12) from shaft (23). Discard cotter pin (8). NOTE Assistant will help with step 2. 2. Remove two locknuts (16), washers (15), screws (7), propeller shaft (23), and bearing housing (18) from frame support (4). Discard locknuts (16). NOTE Mark yoke position for installation. 3. Remove four locknuts (25) and flange yoke (24) from flange (26) and studs (1) located in parking brake drum (2). Discard locknuts (25). 4. Remove four locknuts (3), screws (5), and frame support (4) from crossmember (6). Discard locknuts (3). DISASSEMBLY 1. Remove bearing housing (18) from propeller shaft (23). 2. Remove screw (22), lockwasher (21), and side shield (20) from propeller shaft (23). Discard lockwasher (21). 3. Remove two seals (13) and bearing (19) from bearing housing (18). Discard seals (13). 4. Remove four rubber insulators (14) from bearing housing (18). NOTE Perform step 5 if lubrication fitting is damaged. 5. Remove lubrication fitting (17) from bearing housing (18).