TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 859 of 1176
TM 9-2320-361-24-1 0130 00 0130 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) TRANSMISSION GEARSHIFT LEVER REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Lockwasher (item 213, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). Transmission gearshift lever knob and boot removed (WP 0129 00). REMOVAL 1. Position transmission shifter shaft (3) in neutral. 2. Remove nut (1), lockwasher (2), screw (4), and gearshift lever (3) from transmission shifter shaft (5). Discard lockwasher (2). INSTALLATION 1. Install gearshift lever (3) on transmission shifter shaft (5) with screw (4), new lockwasher (2), and nut (1). Tighten nut (1) 40–50 lb-ft (54–68 N•m). 2. Install transmission gearshift lever knob and boot (WP 0129 00). 3. Connect battery ground cable (WP 0126 00). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 3 4 2 1 5 END OF WORK PACKAGE