TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 857 of 1176
TM 9-2320-361-24-1 0129 00 0129 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) TRANSMISSION GEARSHIFT LEVER KNOB AND BOOT REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL 1. Rotate gearshift knob (1) counterclockwise, and remove from gearshift lever (3). 2. Slide boot (2) up and off ball socket pedestal (4) and gearshift lever (3). INSTALLATION CAUTION Use care during installation to prevent sharp edges from cutting boot. 1. Slide boot (2), small end facing up, over gearshift lever (3) and slide down to fit over ball socket pedestal (4) on transmission housing. 2. Rotate gearshift knob (1) clockwise to install on gearshift lever (3). 3. Connect battery ground cable (WP 0126 00). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 2 3 4 END OF WORK PACKAGE