TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 840 of 1176
TM 9-2320-361-24-1 0125 00 0125 00-2 REAR COMPOSITE LAMPS AND HOUSING REPLACEMENT (Contd) REAR COMPOSITE LAMPS REMOVAL 1. Loosen six screws (8) and remove lens (9) and O-ring (7) from composite lamp housing (5). Discard O-ring (7). 2. Remove lamp(s) (6) from composite lamp housing (5). REAR COMPOSITE LAMPS HOUSING REMOVAL NOTE Prior to removal, tag all lead wires for installation. 1. Disconnect four wires (10) from wires (4). 2. Remove two screws (1), lockwashers (2), and composite lamp housing (5) from bracket (3). Discard lockwashers (2). REAR COMPOSITE LAMPS HOUSING INSTALLATION 1. Install composite lamp housing (5) on bracket (3) with two new lockwashers (2) and screws (1). 2. Connect four wires (10) to wires (4). REAR COMPOSITE LAMPS INSTALLATION 1. Install lamp(s) (6) in composite lamp housing (5). 2. Install new O-ring (7) and lens (9) on composite lamp housing (5) with six screws (8). 3. Connect battery ground cable (WP 0126 00). 4. Check operation of rear composite lamps (TM 9-2320-361-10). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10).