TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 838 of 1176
TM 9-2320-361-24-1 0124 00 0124 00-2 SIDE MARKER CLEARANCE LAMPS REPLACEMENT (Contd) REMOVAL NOTE All side marker lights and clearance lights are replaced the same. 1. Remove two screws (11), lens frame (10), and lens (9) from marker light base (6). 2. Remove lamp (8) from marker light base (6). 3. Remove four nuts (3), lockwashers (4), and screws (7) from marker light base (6) and bracket (5). Discard lockwashers (4). 4. Disconnect wire (2) from wire (1) and remove marker light base (6) from bracket (5). 5. Remove locknut (13), two lockwashers (14), screw (15), and bracket (5) from fender (12). Discard lockwashers (14) and locknut (13). INSTALLATION 1. Install bracket (5) on fender (12) with screw (15), two new lockwashers (14), and new locknut (13). 2. Connect wire (2) to wire (1). 3. Install marker light base (6) on bracket (5) with four screws (7), new lockwashers (4), and nuts (3). 4. Install lamp (8) in marker light base (6). 5. Install lens (9) and lens frame (10) on marker light base (6) with two screws (11). 6. Connect battery ground cable (WP 0126 00). 7. Check operation of side marker light (TM 9-2320-361-10). 8. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 6 7 8 9 10 11 12 13 5 4 3 2 1 15 14