TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 782 of 1176
TM 9-2320-361-24-1 0104 00 0104 00-2 ACCESSORY POWER SWITCH REPLACEMENT (Contd) REMOVAL 1. Remove screw (9), lockwasher (10), and handle (8) from switch (4). Discard lockwasher (10). 2. Remove nut (7), lockwasher (6), and switch plate (1) from switch (4). Discard lockwasher (6). 3. Remove switch (4) from instrument panel (5). NOTE Prior to removal, tag lead wires for installation. 4. Disconnect wires (11), (12), (13), and (14) from switch (4). INSTALLATION 1. Connect wires (11), (12), (13), and (14) to switch (4). 2. Install switch (4) and switch plate (1) on instrument panel (5) with new lockwasher (6) and nut (7). Position locator tab (3) in hole (2). 3. Install handle (8) on switch (4) with new lockwasher (10) and screw (9). 4. Connect battery ground cable (WP 0126 00). 5. Check accessory power switch for proper operation (TM 9-2320-361-10). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 4 3 5 4 11 12 13 14 2 1 10 9 8 7 6 LOAD PORT B LOAD PORT C GROUND PORT A BATTERY PORT C