TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 780 of 1176
TM 9-2320-361-24-1 0103 00 0103 00-2 TURN SIGNAL FLASHER REPLACEMENT (Contd) REMOVAL 1. Disconnect cable connector (4) from turn signal flasher (10). NOTE Assistant will help with steps 2 and 3. 2. Remove nut (1), lockwasher (2), ground lead wire (3), screw (7), and lockwasher (6) from turn signal flasher (10). Discard lockwashers (2) and (6). 3. Remove nut (12), lockwasher (11), screw (9), lockwasher (8), and turn signal flasher (10) from firewall (5). Discard lockwashers (11) and (8). INSTALLATION NOTE Assistant will help with steps 1 and 2. 1. Install turn signal flasher (10) on firewall (5) with screw (9), two new lockwashers (8) and (11), and nut (12). 2. Install ground lead wire (3) on turn signal flasher (10) with screw (7), new lockwashers (6) and (2), and nut (1). 3. Connect cable connector (4) to turn signal flasher (10). 4. Connect battery ground cable (WP 0126 00). 5. Operate turn signal control to check turn signal flasher (TM 9-2320-361-10). 6. Lower hood and secure (TM 9-2320-361-10). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 12 11 10 8 9 6 7 5 2 3 4 END OF WORK PACKAGE