TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 775 of 1176
TM 9-2320-361-24-1 0101 00 0101 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) LIGHT SWITCH REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Parts/Materials Three lockwashers (item 245, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL 1. Remove three screws (6), lockwashers (5), handles (4), and washers (3) from light switch (1). Discard lockwashers (5). 2. Remove four mounting screws (7) from instrument panel (2) and light switch (1). Push light switch (1) through instrument panel (2). 3. Disconnect front wiring harness connector (8) from light switch (1). INSTALLATION 1. Connect front wiring harness connector (8) to light switch (1). 2. Position light switch (1) through instrument panel (2) and install with four mounting screws (7). 3. Install three washers (3) and handles (4) on light switch (1). 4. Install three new lockwashers (5) and screws (6) on light switch (1). 5. Connect battery ground cable (WP 0126 00). 6. Check lights for proper operation (TM 9-2320-361-10). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 6 5 4 2 3 1 8 7 ~