TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 773 of 1176
TM 9-2320-361-24-1 0100 00 0100 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) HEADLIGHT HIGH BEAM INDICATOR AND LAMP REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Two lockwashers (item 245, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). NOTE Headlight high beam indicator assembly and the two instrument cluster light assemblies are removed and installed the same. This procedure covers the high beam indicator light. REMOVAL 1. Turn lens (2) to left and remove. 2. Push in and turn lamp (3) to left and remove. 3. Remove two screws (4), lockwashers (5), and headlight high beam indicator (6) from instrument cluster (1). Discard lockwashers (5). 4. Disconnect connector (7) from headlight high beam indicator (6). INSTALLATION 1. Connect connector (7) to headlight high beam indicator (6). 2. Install headlight high beam indicator (6) in instrument cluster (1) with two new lockwashers (5) and screws (4). 3. Install lamp (3) on high beam indicator (6). 4. Install lens (2) over lamp (3). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 6 7 5 4 3 2 END OF WORK PACKAGE