TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 738 of 1176
TM 9-2320-361-24-1 0092 00 0092 00-2 REAR WIRING HARNESS REPLACEMENT (Contd) REMOVAL (Contd) 2. Remove locknut (12), lockwasher (13), ground wire (14), and screw (2) from support (1). Discard locknut (12) and lockwasher (13). 3. Disconnect plug (11) from fuel pump (10). 4. Disconnect wire (8) from fuel level sending unit (9). 5. Remove two locknuts (7), screws (4), and clamps (3) from rear wiring harness (5) and crossmember (6). Discard locknuts (7). NOTE Steps 6 and 7 cover left side composite light. 6. Disconnect wires (22), (23), (24), and (25) from composite light wires (21), (20), (19), and (18). 7. Remove locknut (26), screw (16), and clamp (15) from bracket (17) and rear wiring harness (5). Discard locknut (26). 8. Repeat steps 6 and 7 for right side composite light. NOTE All trailer receptacles are removed basically the same. 9. Remove four locknuts (44), lockwashers (43), ground wire (28), four screws (40), cap (39), and receptacle (27) from bracket (42). Discard locknuts (44) and lockwashers (43). 10. Remove two locknuts (36), screws (41), and clamps (37) from tail frame (38) and rear wiring harness (5). Discard locknuts (36). 11. Remove four locknuts (29), screws (32), nut (35), and five clamps (30) and (34) from frame (31), stud (33), and rear wiring harness (5). Discard locknuts (29). 1 2 3 4 5 6 7 8 9 10 11 12 13 14