TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 724 of 1176
TM 9-2320-361-24-1 0091 00 0091 00-4 FRONT WIRING HARNESS REPLACEMENT (Contd) REMOVAL (Contd) NOTE Perform step 25 for all vehicles except M50A3 and M49A2C. 25. Remove nut (10) and wire (11) from starter terminal (12). 26. Remove nut (3), washer (4), and wire (5) from relay terminal (6). 27. Remove nut (9), washer (8), and wire (7) from relay terminal (13). 28. Disconnect wire (15) from oil pressure sending unit (14). NOTE Assistant will help with step 29. 29. Remove locknut (18), screw (2), and clamp (17) from firewall (1) and wiring harness (16). Discard locknut (18). 30. Remove nut (39), lockwasher (38), wire (37), screw (36), and lockwasher (35) from flasher unit (34). Discard lockwashers (38) and (35). 31. Remove plug (33) from flasher unit (34). 32. Disconnect wires (26) and (27) from circuit breaker (25). 33. Disconnect wires (30), (29), and (28) from beam selector switch (31). NOTE Assistant will help with steps 34 and 35. 34. Remove four locknuts (20), screws (32), and clamps (19) from front wiring harness (16) and firewall (1). Discard locknuts (20). 35. Remove two locknuts (24), screws (21), washer (40), clamp (22), and two clamp halves (23) from firewall (1). Discard locknuts (24). ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 15