TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 719 of 1176
TM 9-2320-361-24-1 0090 00 0090 00-3/4 blank WIRING HARNESS CONNECTOR REPAIR (Contd) END OF WORK PACKAGE CONNECTOR ASSEMBLY REPAIR NOTE Refer to TC 9-237 for soldering instructions. 1. Strip cable insulation (13) to depth of solder wells (16) on inserts (17). 2. Slide cable ends (20) through grommet retaining nut (14) and grommet (15). 3. Place cable ends (20) into solder wells (16) and solder. 4. Slide grommet (15) over inserts (17) and press into shell assembly (18) until seated. 5. Screw grommet retaining nut (14) on shell assembly (18) and coupling nut (19) until seated. RECEPTACLE ASSEMBLY REPAIR 1. Strip cable insulation (21) to depth of solder wells (25) on inserts (26). 2. Slide cable ends (23) through grommet retaining nut (22) and grommet (24). 3. Place cable ends (23) into solder wells (25) and solder. 4. Slide grommet (24) over inserts (26) and press into receptacle (27) until seated. 5. Screw grommet retaining nut (22) onto receptacle (27) until seated. 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 21 22 23 24 25 26 27 25 26 13 14 20 15 16 17 18 19 16 17