TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 682 of 1176
TM 9-2320-361-24-1 0080 00 0080 00-2 WATER MANIFOLD AND HOSE REPLACEMENT (Contd) REMOVAL NOTE There are two water manifolds and hoses. Both are removed the same way. 1. Loosen two clamps (7) on hose (8). 2. Remove six screws (1) and lockwashers (2) from water manifold (3). Discard lockwashers (2). 3. Remove water manifold (3), three gaskets (4), hose (8), and two clamps (7) from cylinder head (6) and intake manifold (5). Discard gaskets (4). INSTALLATION NOTE There are two water manifolds and hoses. Both are installed the same way. 1. Install hose (8) and two clamps (7) on water manifold (3). Do not tighten clamps (7). 2. Install three new gaskets (4) and water manifold (3) on cylinder head (6) and intake manifold (5) with six new lockwashers (2) and screws (1). 3. Tighten two clamps (7) on hose (8). 4. Install manifold heater (uncovered) (WP 0066 00). 5. Connect battery ground cable (WP 0126 00). 6. Lower and secure hood (TM 9-2320-361-10). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 2 3 7 8 7 6 5 4