TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 646 of 1176
TM 9-2320-361-24-1 0073 00 0073 00-2 EXHAUST SYSTEM REPLACEMENT (ALL EXCEPT M50A3) (Contd) WARNING Do not touch hot exhaust system components with bare hands. Severe injury to personnel will result. REMOVAL 1. Remove locknut (13) and screw (7) from coupling (14). Discard locknut (13). 2. Disconnect elbow (9) from flex tube (15), and remove coupling (14) and gasket (8) from elbow (9). Discard gasket (8). 3. Loosen clamp (11) and remove elbow (9), clamp (11), and gasket (10) from turbocharger (12). Discard gasket (10). 4. Remove locknut (22) and screw (21) from coupling (23), and remove flex tube (15), coupling (23), and gasket (24) from exhaust pipe (29). Discard gasket (24) and locknut (22). 5. Remove locknut (2) and screw (38) from coupling (39). Discard locknut (2). 6. Remove stack pipe (1), coupling (39), and gasket (40) from exhaust pipe (29). Discard gasket (40). 7. Remove four locknuts (4), screws (37), two clamps (3), and exhaust shield (36) from exhaust pipe (29). Discard locknuts (4). 8. Remove two locknuts (30), washers (31), screws (34), washers (33), and cover plates (18) from fender (32). Discard locknuts (30). 9. Remove two nuts (5), lockwashers (6), U-bolt (35), and clamp (17) from exhaust pipe (29) and bracket (16). Discard lockwashers (6). 10. Remove locknut (20), washer (19), screw (28), washer (27), and clamp (26) from exhaust pipe (29) and bracket (25). Discard locknut (20). 11. Remove exhaust pipe (29) from fender (32).