TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 628 of 1176
TM 9-2320-361-24-1 0070 00 0070 00-2 ACCELERATOR PEDAL, BRACKETS, AND ROD MAINTENANCE (Contd) REMOVAL 1. Remove throttle return spring (10) from swivel (9) and throttle return clip (1). 2. Remove screw (3), washers (2), and throttle return clip (1) from steering gear housing (12). 3. Remove cotter pin (4) and pin (11) from swivel (9) and disconnect swivel (9) from pump lever (13). Discard cotter pin (4). 4. Loosen screw (5) and remove connector (6), screw (5), and control wire (7) from flange on accelerator rod (8). 5. Remove locknut (19), ball joint (21), and accelerator rod (22) from lever (20). Discard locknut (19). 6. Remove cotter pin (18), washer (17), and connecting link (16) from lever (20). Discard cotter pin (18). 7. Remove two cotter pins (14), pin (15), and lever (20) from bracket (24). Discard cotter pins (14). NOTE Assistant will help with step 8. 8. Remove two locknuts (25), screws (26), and bracket (24) from cab floor (23). Discard locknuts (25).