TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 618 of 1176
TM 9-2320-361-24-1 0069 00 0069 00-2 FUEL INJECTION PUMP REPLACEMENT (Contd) WARNING • Diesel fuel is flammable. Do not perform fuel system procedures near open flame. Injury to personnel may result. • Accidental or intentional introduction of liquid contaminants into the environment is a violation of state, federal, and military regulations. Refer to Army POL (WP 0001 00) for information concerning storage, use, and disposal of these liquids. Failure to do so may result in damage to environment and health of personnel. CAUTION • Cap or plug all openings immediately after disconnecting lines and hoses to prevent contamination. Remove caps or plugs prior to installation. Failure to do so may result in damage to equipment. • Radiator core is easily damaged. Use care when working near or handling radiator. NOTE • Use a drain pan to capture any draining fuel. Dispose of fluids in accordance with local policy and ordinances. Ensure all spills are cleaned up. • Prior to removal, tag tubes for installation. REMOVAL 1. Remove two nuts (5), lockwashers (4), and screws (1) from adapter plate (6), timing cover (7), and access cover (2). Discard lockwashers (4). 2. Remove three nuts (10), lockwashers (9), access cover (2), and gasket (3) from timing studs cover (8). Discard lockwashers (9) and gasket (3). 3. Remove gasket (3) residue from timing cover (7) and access cover (2).