TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 546 of 1176
TM 9-2320-361-24-1 0053 00 0053 00-2 AIR CLEANER ASSEMBLY MAINTENANCE (Contd) REMOVAL 1. Disconnect tube (2) from adapter (3), and remove adapter (3) from air cleaner head (4). NOTE Step 2 must be performed with two personnel. 2. Remove four nuts (1), screws (6), lockwashers (5), and air cleaner head (4) from firewall (7). Discard lockwashers (5). INSPECTION Inspect air cleaner head (4) for cracks or damage that would allow unfiltered air to enter. Replace air cleaner head (4) if cracked or damaged. INSTALLATION NOTE Step 1 must be performed with two personnel. 1. Install air cleaner head (4) on firewall (7) with four screws (6), new lockwashers (5), and nuts (1). NOTE Male pipe threads must be wrapped with antiseize tape before installation. 2. Install adapter (3) on air cleaner head (4). 3. Connect tube (2) to adapter (3). 4. Install air cleaner element (WP 0052 00). 5. Install air intake tube and cap (WP 0051 00). 6. Connect battery ground cable (WP 0126 00). 7. Lower and secure hood (TM 9-2320-361-10). 8. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 2 3 4 5 6 7 ~