TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 542 of 1176
TM 9-2320-361-24-1 0052 00 0052 00-2 AIR CLEANER CAP AND FILTER ELEMENT REPLACEMENT (Contd) WARNING • If Nuclear, Biological, and Chemical (NBC) exposure is suspected, all air filter media must be handled by personnel wearing protective equipment. Consult your unit NBC officer or NBC noncommissioned officer for appropriate handling and disposal instructions. Failure to do so may result in injury to personnel. • NBC contaminated filters must be handled using adequate precautions and must be disposed of by trained personnel. Failure to do so may result in injury to personnel. CAP REMOVAL Loosen clamp (2) and remove cap (1) and clamp (2) from air cleaner shell (3). ELEMENT REMOVAL 1. Unlatch three clamps (5) and remove air cleaner shell (3) from air cleaner head (4). 2. Remove filter element (7) from air cleaner shell (3). 3. Remove seal (6) from air cleaner head (4). ELEMENT INSTALLATION 1. Install seal (6) in air cleaner head (4). 2. Install filter element (7) in air cleaner shell (3). 3. Align air cleaner shell (3) with air cleaner head (4) and install with three clamps (5). CAP INSTALLATION 1. Install clamp (2) and cap (1) to air cleaner shell (3) and tighten clamp (2). 2. Connect battery ground cable (WP 0126 00). 3. Lower and secure hood (TM 9-2320-361-10). 4. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 5. Start engine (TM 9-2320-361-10) and make sure air filter indicator in cab indicates green (TM 9-2320-361-10).