TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 524 of 1176
TM 9-2320-361-24-1 0047 00 0047 00-2 CLUTCH CONTROL LINKAGE MAINTENANCE (Contd) REMOVAL 1. Remove clutch return spring (7) from clutch shaft lever (6) and frame (10). 2. Mark shaft of clutch pedal (3) with chalk next to remote control lever (14). 3. Remove screw (1), clutch pedal (3), and rubber bumper (2) from remote control lever (14). 4. Remove locknut (13), screw (4), remote control lever (14), and woodruff key (12) from pedal lever shaft (11). Discard locknut (13) and woodruff key (12). 5. Remove locknut (9), screw (5), and rod (8) from clutch shaft lever (6). Discard locknut (9). 6. Remove locknut (26), screw (21), and remote control lever (20) with rod (8) from shaft (22). Discard locknut (26). NOTE Do not remove spring loaded pin from clevis. 7. Pull pin (24) to one side of clevis (25) and remove remote control lever (20) from clevis (25). 8. Loosen nut (23) and remove clevis (25) and nut (23) from rod (8). 9. Remove locknut (18), screw (17), clutch shaft lever (6), and pedal lever shaft (11) from brake lever (19) and shaft support (16). Discard locknut (18). 10. Remove woodruff key (15) from shaft (11). Discard woodruff key (15).