TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 512 of 1176
TM 9-2320-361-24-1 0046 00 0046 00-12 ENGINE REPLACEMENT (Contd) REMOVAL (Contd) 43. Remove six screws (7), washers (8), and support plate (10) from two front engine supports (9). 44. Remove two screws (5), screws (6), washers (4), and two front engine supports (9) from engine (1). 45. Remove eight locknuts (3) and two rear engine supports (2) from engine (1). Discard locknuts (3). CAUTION Before removing transmission, ensure transmission is properly supported. Failure to do so may result in damage to equipment. 46. Position transmission jack or wooden supports under transmission (13). 47. Remove twelve screw-assembled lockwashers (12) from transmission (13) and flywheel housing (11). Discard screw-assembled lockwashers (12). 48. Remove transmission (13) and gasket (14) from flywheel housing (11). Discard gasket (14). NOTE If clutch replacement is required, perform step 49. 49. Remove pressure plate and clutch (WP 0050 00). 2 3 1 4 5 6 4 7 8 9 10