TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 488 of 1176
TM 9-2320-361-24-1 0042 00 0042 00-2 OIL DIPSTICK TUBE REPLACEMENT (Contd) REMOVAL 1. Remove nut (1), lockwasher (7), and screw (3) from bracket (6). Discard lockwasher (7). 2. Remove dipstick tube (5) from engine (4) and bracket (6). NOTE Perform step 3 only if oil dipstick tube bracket needs replacement. 3. Remove two nuts (2) and bracket (6) from engine (4). INSTALLATION NOTE • Male pipe threads must be wrapped with antiseize tape before installation. • Perform step 1 only if oil dipstick tube bracket was removed. 1. Install bracket (6) on engine (4) with two nuts (2). 2. Insert dipstick tube (5) through bracket (6), and install dipstick tube (5) on engine (4). 3. Install screw (3), new lockwasher (7), and nut (1) on dipstick tube bracket (6). 4. Install dipstick (TM 9-2320-361-10). 5. Connect battery ground cable (WP 0126 00). 6. Lower and secure hood (TM 9-2320-361-10). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 4 5 6 7 1 2 3 END OF WORK PACKAGE