TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 412 of 1176
TM 9-2320-361-24-1 0027 00 0027 00-2 CYLINDER HEAD MAINTENANCE (Contd) REMOVAL 1. Remove two screws (8), lockwashers (7), bracket (6), and lifting bracket (9) from cylinder head (2). Discard lockwashers (7). 2. Using cylinder head wrench, remove fourteen nuts (1) and washers (10) from studs (5). CAUTION Uneven lifting and binding of cylinder head may damage studs and cause misalignment of cylinder head during installation. NOTE Cylinder head is heavy and may require the use of a lifting device during removal. 3. Remove cylinder head (2) and gasket (3) from engine block (4). Discard gasket (3). CLEANING AND INSPECTION 1. For general cleaning and inspection instructions, refer to WP 0021 00. 2. Remove all excess gasket material from engine block (4) and cylinder head (2). 3. For stud removal and care, refer to WP 0021 00.