TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 401 of 1176
TM 9-2320-361-24-1 0024 00 0024 00-3/4 blank ENGINE FRONT MOUNT PAD REPLACEMENT (Contd) FRONT MOUNT PAD INSTALLATION WARNING Do not put fingers between frame and engine support. Jack failure may result in injury to personnel. 1. Install two lower front pads (24) and upper front pads (25) on front crossmember (6), 2. Carefully lower engine and radiator (3) guiding two screws (8) through upper and lower front pads (25) and (24) and front crossmember (6). 3. Install fuel line (7) on front crossmember (6) with two clamps (5), screws (14), and nuts (4). 4. Install ground strap (23) on front crossmember (6) with screw (17), washer (18), new lockwasher (19), and nut (20). 5 Install two washers (15) and new locknuts (16) on screws (8). Tighten locknuts (16) 65–70 lb-ft (88–95 N•m). 6. Install two washers (10), springs (11), washers (12), and new locknuts (13) on studs (2). Do not fully compress springs (11). 7. Install front bumper (WP 0204 00). 8. Install brush guard (WP 0203 00). 9. Lower and secure hood (TM 9-2320-361-10). 10. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 11. Connect battery ground cable (WP 0126 00). END OF WORK PACKAGE ~ ~ 4 7 6 8 9 10 11 12 13 14 15 16 17 18 19 20 23 25 24 2 1 3 22 21 5