TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 335 of 1176
TM 9-2320-361-24-1 0018 00 0018 00-31 SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE— REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd) Table 2. STE/ICE-R No-Go Chain Test (Contd). GOVERNOR/POWER TEST FAULT ISOLATION (Contd) NG90 TK MODE INSTALL TRANSDUCER • Install pressure transducer, TK Item 17 (Blue Stripe) in outlet side of secondary fuel filter. • Connect P1 of transducer cable W4 to J2 on VTM. • Connect P2 of transducer cable to connector on transducer. 3 • Dial 50 into TEST SELECT switches and press TEST. • Press and hold TEST until CAL message appears on display. • Release TEST. • Wait for offset value to appear on display. • Proceed to next page. TEST NO. TEST 50 0–1000 PSIG, PRESSURE PROMPTING MESSAGE FUEL PRESSURE TRANSDUCER INSTALLATION TK ITEM 17 TK ITEM 20 TK ITEM 27 W4 P2