TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 311 of 1176
TM 9-2320-361-24-1 0018 00 0018 00-7 SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE— REPROGRAMMABLE STE/ICE-R NO-GO CHAIN TROUBLESHOOTING (Contd) Table 2. STE/ICE-R No-Go Chain Test (Contd). TK ITEM 14 FUEL PRESSURE TRANSDUCER INSTALLATION STEP 3 TK ITEM 26 TK ITEM 22 P2 CABLE W4 • Dial 49 into TEST SELECT switches and press TEST. • Press and hold TEST until CAL message appears on display. • Release TEST. • Wait for offset value to appear on display. • Is offset value within range of –4 to +4? TEST NO. TEST 49 0–25 PSIG PRESSURE PROMPTING MESSAGE INSTALL TRANSDUCER: • Install pressure transducer (red stripe) in outlet side of secondary fuel filter. • Connect P1 of transducer cable W4 to J2 on VTM. • Connect P2 of transducer cable to connector on transducer. 3 4 • Proceed to step 4. NO YES • Proceed to TM 9-4910-571-12&P for offset fault isolation. ENGINE CRANK—NO START (Contd) NG30 TK MODE