TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 279 of 1176
TM 9-2320-361-24-1 0016 00 0016 00-9 SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION ENGINE—REPROGRAMMABLE (STE/ICE-R) TROUBLESHOOTING INTRODUCTION (Contd) Table 3. Error Messages (Contd). VTM READOUT INTERPRETATION E024 Test is not valid for VID entered. E027 Error in entry of compression unbalance constants. E028 Test just entered cannot be used with control function 06. E030 VID entered conflicts with speed transducer attached. E032 Vehicle’s cranking speed is varying too much for a compression unbalance measurement. E033 Error in entry of power test constants. *Different STE/ICE vehicle connectors have different DCA numbers. You can find out what DCA connector is connected by entering test 62. These error messages have a special meaning if connected to DCA number 13 and message is displayed in response to a cylinder (CYL) or UEH (refer to table 2) entry. In these cases, testing may continue, but the message is a warning that tests using CYL and UEH information are normally performed with the VTM connected to a different connector in the vehicle.