TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 257 of 1176
TM 9-2320-361-24-1 0015 00 0015 00-1 MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 1. ENGINE MANIFOLD HEATER DOES NOT WORK Test 1. Test engine manifold heater ignition circuit for battery voltage. 1. Disconnect lead 55 from engine manifold heater ignition unit. Manifold heater fuel pump is now disabled. 2. Set multimeter to a voltage range that will measure 24 VDC. 3. Turn power accessory switch to ON position. 4. Push manifold heater switch and hold. 5. Touch positive lead of multimeter to contact end of lead 55 and negative lead to frame ground. 1. If battery voltage is present, go to test 4. 2. If battery voltage is not present, go to test 2. Table 1. Heating Systems Troubleshooting Procedures. FIELD TROUBLESHOOTING 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) HEATING SYSTEMS TROUBLESHOOTING TEST 1 STEP 5 MANIFOLD HEATER FUEL PUMP HARNESS LEAD 55 PIN A PIN B FUEL PUMP IGNITION COIL