TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 25 of 1176
TM 9-2320-361-24-1 xv/xvi blank HOW TO USE THIS MANUAL ABOUT YOUR MANUAL Prior to performing vehicle maintenance, you must be familiar with the structure and content of this Technical Manual (TM). Knowing how to use this manual allows you to quickly find information and decrease the time required to perform a procedure. This TM has the following key features: • Work Package Format—This TM is modular and is organized into Work Packages (WP). Each WP is a stand-alone information package. Each WP has a two-character plus six-digit number (e.g., WP 0001 00). The first four digits identify the sequential WP number (i.e., 0001, 0002, 0003, etc.), and the last two digits indicate the revision level (i.e., 00 is the initial release; 01 is revision 1; 02 is revision 2, etc.). • Cover—Chapter numbers and titles are listed on the front cover for quick reference. • Table of Contents—WP titles and numbers are listed in the Table of Contents of this TM. • Acronyms and Abbreviations—A list of acronyms and abbreviations that are used throughout this manual is provided in WP 0001 00. • Illustrations—The illustrations contain numerical callouts to identify parts, components, etc., mentioned in the text. Numerical callouts generally appear in clockwise order, beginning at the 11 o’clock position. • Index—The alphabetical index is located immediately following the last WP. The index lists maintenance procedures and the WP and page number for each entry. HOW TO USE YOUR MANUAL You must familiarize yourself with the entire maintenance procedure before beginning a maintenance task. Here’s an example of how to use your manual: PROBLEM: The unit maintenance mechanic receives a report that the starter motor needs to be replaced. SOLUTION: Follow these steps: 1. Locate the WP for Starter Motor Replacement (WP 0088 00) in the Table of Contents or Index. 2. Turn to Starter Motor Replacement (WP 0088 00). 3. Review the Initial Setup section, which contains information you need before starting the maintenance procedure. Included are: • Applicable Models: Vehicle(s) covered in the maintenance task. • Tools and Special Tools: Tools needed to perform the maintenance task. • Materials/Parts: All mandatory replacement parts and materials needed to perform the task. • Personnel Required: The number of personnel required for a task if task requires more than one. • References: Manuals needed to complete the task. • Equipment Condition: Conditions that must exist before starting the task. This manual was designed so that text and corresponding illustrations appear together. This makes part identification and procedure sequence easier to follow. Illustrations include diagrams of the component, removed from the vehicle, showing part locations, attachments, and spatial relationships. Your manual is easier to use once you understand its design. We hope it will encourage you to use it more often.