TM-9-2320-361-24-1 Field Maintenance Manual Volume 1 for M44A2 Series Trucks
Page 1032 of 1176
TM 9-2320-361-24-1 0164 00 0164 00-6 PARKING BRAKESHOE MAINTENANCE (Contd) ASSEMBLY NOTE Perform step 1 only if lubrication fittings were removed. 1. Install three lubrication fittings (1) into outer brakeshoe (2) and one lubrication fitting (1) and new pin (7) into inner brakeshoe (6). 2. Coat pin (5) with light film of GAA grease and install inner brakeshoe (6) on pin (5) with new clip (8). 3. Coat pin (3) with light film of GAA grease and install outer brakeshoe (2) on pin (3) with new clip (11). 4. Coat cam pin (10) with light film of GAA grease and install cam pin (10) in outer brakeshoe (2) with new lockwasher (12) and nut (13). 5. Install two washers (18) and (17) and spring (16) on pins (3) and (5) with two new clips (15). Position V of spring (16) towards lever (4). Turn cam pin (10) for maximum opening between brakeshoes (2) and (6).